Identification_Information: Citation: Citation_Information: Originator: USGS Earth Resources Observation & Science (EROS) Center Publication_Date: 19970514 Title: Digital Orthophoto Quadrangle: DI00000000044769-TETON VILLAGE-NW,WY Geospatial_Data_Presentation_Form: remote-sensing image Publication_Information: Publication_Place: Menlo Park, CA USA Publisher: U.S. Geological Survey Online_Linkage: http://earthexplorer.usgs.gov Description: Abstract: Orthophotos combine the image characteristics of a photograph with the geometric qualities of a map. The primary digital orthophotoquadrangle (DOQ) is a 1-meter ground resolution, quarter-quadrangle (3.75 minutes of latitude by 3.75 minutes of longitude) image cast on the Universal Transverse Mercator projection (UTM) on the North American Datum of 1983 (NAD83).The geographic extent of the DOQ is equivalent to a quarter-quadrangle plus the overedge ranges from a minimum of 50 meters to a maximum of 300 meters beyond the extremes of the primary and secondary corner points. The overedge is included to facilitate tonal matching for mosaicking and for the placement of the NAD83 and secondary datum corner ticks. The normal orientation of data is by lines (rows) and samples (columns). Each line contains a series of pixels ordered from west to east with the order of the lines from north to south. The radiometric image brightness values are stored as 256 gray levels, ranging from 0 to 255. The standard, uncompressed gray scale DOQ format contains an ASCII header followed by a series of 8-bit image data lines. The keyword-based, ASCII header may vary in the number of data entries. The header is affixed to the beginning of the image and is composed of strings of 80 characters with an asterisk (*) as character 79 and an invisible newline character as character 80. Each keyword string contains information for either identification, display, or registration of the image. Additional strings of blanks are added to the header so that the length of a header line equals the number of bytes in a line of image data. The header line will be equal in length to the length of an image line. If the sum of the byte count of the header is less than the sample count of one DOQ image line, then the remainder of the header is padded with the requisite number of 80 character blank entries, each terminated with an asterisk and newline character. Purpose: DOQs serve a variety of purposes, from interim maps to field references for Earth science investigations and analysis. The DOQ is useful as a layer of a geographic information system and as a tool for revision of digital line graphs and topographic maps. Supplemental_Information: For further information on USGS Maps, see: http://geography.usgs.gov/products.html#maps Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 19940824 Currentness_Reference: Ground condition Status: Progress: in work Maintenance_and_Update_Frequency: sporadic Spatial_Domain: Bounding_Coordinates: West_Bounding_Coordinate: -110.875 East_Bounding_Coordinate: -110.8125 North_Bounding_Coordinate: 43.625 South_Bounding_Coordinate: 43.5625 Keywords: Theme: Theme_Keyword_Thesaurus: none Theme_Keyword: orthophoto Theme_Keyword: 1-meter orthophoto Theme_Keyword: 3.75- x 3.75-minute orthophoto Theme_Keyword: aerial photograph Theme_Keyword: digital orthophoto Theme_Keyword: DOQ Theme_Keyword: digital image map Theme_Keyword: digital orthophotoquad Theme_Keyword: DOQQ Theme_Keyword: 7.5- x 7.5-minute orthophoto Theme_Keyword: 2-meter orthophoto Theme_Keyword: quarter-quadrangle orthophoto Theme_Keyword: rectified photograph Place: Place_Keyword_Thesaurus: None Place_Keyword: US Place_Keyword: MX Place_Keyword: CA Place_Keyword: WY Access_Constraints: none Use_Constraints: None. Acknowledgement of the U.S. Geological Survey is appreciated in products derived from these data. Point_of_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey Earth Resources Observation and Science (EROS) Center Contact_Person: Customer Services Representative Contact_Address: Address_Type: mailing and physical address Address: U.S. Geological Survey Earth Resources Observation and Science (EROS) Center 47914 252nd Street City: Sioux Falls State_or_Province: SD Postal_Code: 57198-0001 Country: USA Contact_Electronic_Mail_Address: lta@usgs.gov Hours_of_Service: 0800 - 1600 CT, M-F Contact_Instructions: Online Ordering: Once you have filled out and submitted the online ordering form found at http://earthexplorer.usgs.gov, EROS uses a secure credit card server that will encrypt your sensitive information and pass it from your browser to the EROS web server. Mail Ordering: First obtain the ordering information from Earth Explorer. Mail this information, along with your payment (check or money order), to USGS, Earth Resources Observation & Science (EROS) Center, 47914 252nd Street, Sioux Falls SD 57198-0001 Browse_Graphic: Browse_Graphic_File_Name: Browse graphic for: http://edcsns17.cr.usgs.gov/browse/doq_qq/T/teton_village_WY/O4311026.NWS.44769.jpg Browse_Graphic_File_Description: image Browse_Graphic_File_Type: JPEG Security_Information: Security_Classification_System: none Security_Classification: unclassified Security_Handling_Description: none Data_Quality_Information: Attribute_Accuracy: Attribute_Accuracy_Report: During photographic reproduction of the source photography, limited analog dodging is performed to improve image quality. Analog dodging consists of holding back light from certain areas of the sensitized photographic material to avoid overexposure. The diapositive is inspected to insure clarity and radiometric uniformity. Diapositive image brightness values are collected with a minimum of image quality manipulation. Image brightness values may deviate from brightness values of the original imagery due to image value interpolation during the scanning and rectification processes. Radiometry is verified by visually inspecting the DOQs to the original unrectified image to determine if the DOQ has the same image quality or better image quality than the original unrectified input image. Slight systematic and radiometric differences can be detected between adjacent DOQ files due primarily to differences in source photography capture dates and Sun angles of aerial photography along flight lines. These differences can be observed in an image's general lightness or darkness when compared to adjacent DOQ file coverages. Quantitative_Attribute_Accuracy_Assessment: Attribute_Accuracy_Value: 7.0 meters RMSE Attribute_Accuracy_Explanation: The DOQ root-mean-square-error (RMSE) is the square root of the average of the squared discrepancies. These discrepancies are the differences in coordinate (x and y) values derived by comparing the data being tested with values determined during aerotriangulation or by an independent survey of higher accuracy. Logical_Consistency_Report: All DOQ header data and image file sizes are validated by Tape Validation System (TVS) software prior to archiving in the Sales Data Base. This validation procedure assures correct physical format and field values for header record elements. Logical relationships between header record elements are tested. Completeness_Report: All DOQ images are visually inspected for completeness to ensure that no gaps or image misplacement exists in the image area or in overedge coverage. The DOQ images may be derived by mosaicking multiple images, in order to insure complete coverage. All DOQs are cloud free. Some clouds may, very infrequently, be encountered only in the overedge coverage. Source photography is leaf-off in deciduous vegetation regions. Void areas may exist, having a radiometric value of zero and appearing black. These voids are areas for which no photographic source is available or are the result of image transformation from other planimetric systems to the UTM projection. In the latter case, the void sliver areas are on the outside edges of the overedge area. The data set field content of each DOQ header record element is validated to assure completeness prior to archiving in the Sales Data Base. Positional_Accuracy: Horizontal_Positional_Accuracy: Horizontal_Positional_Accuracy_Report: The DOQ horizontal positional accuracy and the assurance of that accuracy depend, in part, on the accuracy of the data inputs to the rectification process. These inputs consist of the digital elevation model (DEM), aerotriangulation control and methods, the photo source camera calibration, scanner calibration, and aerial photographs that meet National Aerial Photography Program (NAPP) standards. Field control is acquired by third order class 1 or better survey methods sufficiently spaced to meet National Map Accuracy Standards for 1:12,000-scale products. Aerial cameras have current certification from the USGS, National Mapping Division, Optical Science Laboratory. Test calibration scans are performed on all source photography scanners. Vertical_Positional_Accuracy: Vertical_Positional_Accuracy_Report: The vertical accuracy of the verified USGS format DEM is equivalent to or better than a USGS level-1 or -2 DEM. Quantitative_Vertical_Positional_Accuracy_Assessment: Vertical_Positional_Accuracy_Value: 7 Vertical_Positional_Accuracy_Explanation: meters Lineage: Source_Information: Source_Citation: Citation_Information: Originator: U.S. Geological Survey Publication_Date: UNKNOWN Title: 265717 Geospatial_Data_Presentation_Form: map Publication_Information: Publication_Place: Menlo Park, CA USA Publisher: U.S. Geological Survey Type_of_Source_Media: cartridge tape Source_Time_Period_of_Content: Time_Period_Information: Range_of_Dates/Times: Beginning_Date: 19880805 Ending_Date: Present Source_Currentness_Reference: ground condition Source_Citation_Abbreviation: DEM1 Source_Contribution: Elevation data in the form of an ortho-DEM regridded to user-specified intervals and bounds. Source_Information: Source_Citation: Citation_Information: Originator: U.S. Geological Survey Publication_Date: Unknown Title: NAPP 7824 159 Geospatial_Data_Presentation_Form: remote-sensing image Publication_Information: Publication_Place: Menlo Park, CA USA Publisher: U.S. Geological Survey Source_Scale_Denominator: 40000 Type_of_Source_Media: cartridge tape Source_Time_Period_of_Content: Time_Period_Information: Range_of_Dates/Times: Beginning_Date: Unknown Ending_Date: Present Source_Currentness_Reference: ground condition Source_Citation_Abbreviation: PHOTO1 Source_Contribution: Panchromatic black and white (or color infrared) NAPP or NAPP-like photograph. The NAPP photographs are centered on the DOQ coverage area. Source_Information: Source_Citation: Citation_Information: Originator: U.S. Geological Survey Publication_Date: Unpublished material Title: project ground and photo control Geospatial_Data_Presentation_Form: remote-sensing image Publication_Information: Publication_Place: Menlo Park, CA USA Publisher: U.S. Geological Survey Type_of_Source_Media: Various media Source_Time_Period_of_Content: Time_Period_Information: Range_of_Dates/Times: Beginning_Date: Unknown Ending_Date: Present Source_Currentness_Reference: ground condition Source_Citation_Abbreviation: CONTROL_INPUT Source_Contribution: Horizontal and vertical control used to establish positions and elevations for reference and correlation purposes. Source_Information: Source_Citation: Citation_Information: Originator: U.S. Geological Survey Publication_Date: Unpublished material Title: Report of calibration Geospatial_Data_Presentation_Form: remote-sensing image Publication_Information: Publication_Place: Menlo Park, CA USA Publisher: U.S. Geological Survey Type_of_Source_Media: disc, paper Source_Time_Period_of_Content: Time_Period_Information: Range_of_Dates/Times: Beginning_Date: Unknown Ending_Date: Present Source_Currentness_Reference: Date of camera calibration associated with the source photography Source_Citation_Abbreviation: CAMERA_INPUT Source_Contribution: camera calibration parameters Process_Step: Process_Description: Process_Step: Process_Description: To produce a DOQ requires (1) a minimum of three ground positions that can be identified on the photograph to be rectified, (2) camera calibration parameters, such as the calibrated focal length and the coordinates of the camera fiducials, (3) a digital elevation model (DEM), and (4) a digital image produced by scanning an aerial photograph with a precise, high-resolution scanner.The digital image is rectified to generate an orthophoto by processing requirements 1 through 3 above for each image picture element (pixel), using rigorous photogrammetric equations on a computer. The finished product is a spatially accurate image with planimetric features represented in their true geographic positions. Source_Used_Citation_Abbreviation: NAPP Process_Date: UNKNOWN Cloud_Cover: 0 percent Spatial_Data_Organization_Information: Direct_Spatial_Reference_Method: raster Raster_Object_Information: Raster_Object_Type: pixel Row_Count: 7562 Column_Count: 5720 Spatial_Reference_Information: Horizontal_Coordinate_System_Definition: Planar: Grid_Coordinate_System: Grid_Coordinate_System_Name: Universal Transverse Mercator Universal_Transverse_Mercator: UTM_Zone_Number: 19 Transverse_Mercator: Scale_Factor_at_Central_Meridian: .09996 Longitude_of_Central_Meridian: -123 00 00 Latitude_of_Projection_Origin: 0.0 False_Easting: 0 False_Northing: 0 Planar_Coordinate_Information: Planar_Coordinate_Encoding_Method: row and column Coordinate_Representation: Abscissa_Resolution: 1 Ordinate_Resolution: 1 Planar_Distance_Units: meters Geodetic_Model: Horizontal_Datum_Name: North American Datum 1983 Ellipsoid_Name: Geodetic Reference System 80 Semi-major_Axis: 6378137 Denominator_of_Flattening_Ratio: 297.257 Entity_and_Attribute_Information: Overview_Description: Entity_and_Attribute_Overview: Each pixel contains an 8-bit gray-scale value between 0 and 255 for DOQs from a panchromatic source. A value of 0 represents the color black, while a value of 255 represents the color white. All values between 0 and 255 are represented as a shade of gray, varying from black to white. For color-infrared and natural color DOQs, a digital number from 0 to 255 also will be asssigned to each pixel, but that number will refer to a color look-up table which will contain the red, green, and blue (RGB) values, each from 0 to 255, for that digital number. Areas where the rectification process is incomplete due to incomplete data (e.g., lack of elevation data, gaps), are represented with the numeric value of 0. Entity_and_Attribute_Detail_Citation: U.S. Department of the Interior, U.S. Geological Survey, guide for digital orthophotos: Reston, VA. A hypertext version is available at: http://edc.usgs.gov/products/aerial/doq.html U.S. Department of the Interior, U.S. Geological Survey, 1992, Standards for digital orthophotos: Reston, VA. Softcopies in ASCII, WordPerfect, and PostScript format are available at: http://rockyweb.cr.usgs.gov/nmpstds/doqstds.html / Distribution_Information: Distributor: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey Earth Resources Observation and Science (EROS) Center Contact_Position: Contact_Address: Address_Type: mailing and physical address Address: Customer Services, U.S. Geological Survey Earth Resources Observation and Science (EROS) Center 47914 252nd Street City: Sioux Falls State_or_Province: SD Postal_Code: 57198-0001 Country: USA Contact_Electronic_Mail_Address: lta@usgs.gov Hours_of_Service: 0800 - 1600 CT, M-F Distribution_Liability: Although these data have been processed successfully on a computer system at the USGS, no warranty expressed or implied is made by the USGS regarding the use of the data on any other system, nor does the act of distribution constitute any such warranty. Standard_Order_Process: Digital_Form: Digital_Transfer_Information: Format_Name: USGS_DOQ Format_Specification: Optional (Native) or GeoTIFF Format_Information_Content: The standard, archived, quarter-quadrangle DOQ is uncompressed and is approximately 45-50 Mb in size. DOQs are distributed in both compressed and uncompressed format. The compressed DOQ is approximately 4-6 Mb in size and is accompanied by a separate header file. Transfer_Size: 4-6 Digital_Transfer_Option: Offline_Option: Recording_Format: Native or GeoTiff Ordering_Instructions: Dataset searching and ordering capabilities are available though EarthExplorer at: http://earthexplorer.usgs.gov Turnaround: Delivery Times can be found at: http://eros.usgs.gov/#/About_Us/Customer_Service/Delivery_Times Technical_Prerequisites: Adequate computer capability is the only technical prerequisite for viewing data in digital form. Metadata_Reference_Information: Metadata_Date: 20000801 Metadata_Review_Date: 20050301 Metadata_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey Earth Resources Observation and Science (EROS) Center Contact_Position: Contact_Address: Address_Type: mailing and physical address Address: U.S. Geological Survey Earth Resources Observation and Science (EROS) Center 47914 252nd Street City: Sioux Falls State_or_Province: SD Postal_Code: 57198 Country: USA Contact_Electronic_Mail_Address: lta@usgs.gov Hours_of_Service: 0800 - 1600 CT, M-F Metadata_Standard_Name: Content Standard for Digital Geospatial Metadata Metadata_Standard_Version: FGDC-STD-001-1998, Version 2.0 Metadata_Time_Convention: local time Metadata_Access_Constraints: None Metadata_Use_Constraints: None Metadata_Security_Information: Metadata_Security_Classification_System: None Metadata_Security_Classification: Unclassified Metadata_Security_Handling_Description: None