U.S. Department of Agriculture, Natural Resources Conservation Service, 20120815, Soil Survey Geographic (SSURGO) database for Teton Area, Idaho-Wyoming: U.S. Department of Agriculture, Natural Resources Conservation Service, Fort Worth, Texas.Online Links:
This is a Vector data set.
Planar coordinates are encoded using coordinate pair
Abscissae (x-coordinates) are specified to the nearest 0.000000
Ordinates (y-coordinates) are specified to the nearest 0.000000
Planar coordinates are specified in meters
The horizontal datum used is North American Datum of 1983.
The ellipsoid used is Geodetic Reference System 80.
The semi-major axis of the ellipsoid used is 6378137.000000.
The flattening of the ellipsoid used is 1/298.257222.
Formal codeset | |
---|---|
Codeset Name: | Classification and Correlation of the Soils of Teton Area, Idaho-Wyoming |
Codeset Source: | U.S. Department of Agriculture, Natural Resources Conservation Service |
208-378-5728 (voice)
hal.swenson@id.usda.gov
SSURGO depicts information about the kinds and distribution of soils on the landscape. The soil map and data used in the SSURGO product were prepared by soil scientists as part of the National Cooperative Soil Survey.
U.S. Department of Agriculture, Soil Conservation Service, 1969, Soil Survey of Teton Area, Idaho-Wyoming: U.S. Government Printing Office, Washington, D.C..
Technical Imaging Service, Portland, OR, unpublished material, publication negatives, 1/3 quadrangle format.
Technical Imaging Service, Portland, OR, unpublished material, ratioed film positives, 1/3 quadrangle format.
U.S. Department of the Interior, Bureau of Land Management, Boise, Idaho, 1999, orthophotographs, full quadrangle format.
Cyrese Lingard, private contractor, unpublished material, recompilation of Teton Area, Idaho-Wyoming, soils layer, full quadrangle format.
Cyrese Lingard, private contractor, unpublished material, recompilation of Teton Area, Idaho-Wyoming, special soil features layer, full quadrangle format.
Idaho State University, GIS Center, unpublished material, digital special soil features of Teton Area, Idaho-Wyoming.
Idaho State University, GIS Center, unpublished material, digital soils of Teton Area, Idaho-Wyoming.
U.S. Department of Agriculture, Natural Resources Conservation Service, Soda Springs GIS Office, Soda Springs, ID, unpublished material, DLG, DOC and TAB directories of the Soil Survey of Teton Area, Idaho-Wyoming.
U.S. Department of Agriculture, Natural Resources Conservation Service, Bozeman Digitizing Unit, Bozeman, MT, unpublished material, DLG, DOC and TAB directories of the Soil Survey of Teton Area, Idaho-Wyoming.
U.S. Department of Agriculture, Natural Resources Conservation Service, 2004, National Soil Information System (NASIS) data base: U.S. Department of Agriculture, Natural Resources Conservation Service, Fort Collins, Colorado.
U.S. Department of Agriculture, Natural Resources Conservation Service, unpublished material, Arc shapefiles for the survey of Teton Area, Idaho-Wyoming.
U.S. Department of Agriculture, Natural Resources Conservation Service, 2006, National Soil Information System (NASIS) database for Teton Area, Idaho-Wyoming: U.S. Department of Agriculture, Natural Resources Conservation Service, Information Technology Center, Fort Collins, Colorado.
U.S. Department of Agriculture, Natural Resources Conservation Service, unpublished material, ArcGIS geodatabase files for the soil survey of Teton Area, Idaho-Wyoming.
U.S. Department of Agriculture, Natural Resources Conservation Service, 2011, National Soil Information System (NASIS) database: U.S. Department of Agriculture, Natural Resources Conservation Service, Information Technology Center, Fort Collins, Colorado.
Data sources used in this process:
Data sources used in this process:
Data sources used in this process:
Data sources used in this process:
Data sources used in this process:
Data sources used in this process:
Data sources used in this process:
Data sources used in this process:
Data sources used in this process:
Data sources used in this process:
Data sources used in this process:
Data sources used in this process:
Data sources used in this process:
Data sources used in this process:
Data sources used in this process:
Data sources used in this process:
Data sources used in this process:
Data sources used in this process:
Data sources used in this process:
Data sources used in this process:
Data sources used in this process:
Data sources used in this process:
Data sources used in this process:
Data sources used in this process:
Attribute accuracy is tested by manual comparison of the source with hard copy plots and/or symbolized display of the map data on an interactive computer graphic system. Selected attributes that cannot be visually verified on plots or on screen are interactively queried and verified on screen. In addition, the attributes are tested against a master set of valid attributes. All attribute data conform to the attribute codes in the signed classification and correlation document and amendment(s).
The accuracy of these digital data is based upon their
compilation to base maps that meet National Map
Accuracy Standards at a scale of 1 inch equals 1,000
feet. The difference in positional accuracy between the
soil boundaries and special soil features locations in the
field and their digitized map locations is unknown. The
locational accuracy of soil delineations on the ground varies
with the transition between map units.
For example, on long gently sloping landscapes the transition
occurs gradually over many feet. Where landscapes change
abruptly from steep to level, the transition will be very
narrow. Soil delineation boundaries and special soil features
generally were digitized within 0.01 inch of their locations on
the digitizing source. The digital map elements are edge matched
between data sets. The data along each quadrangle edge are
matched against the data for the adjacent quadrangle. Edge
locations generally do not deviate from centerline to centerline
by more than 0.01 inch.
A map unit is a collection of areas defined and named in terms of
their soil components or miscellaneous areas or both. Each map
unit differs in some respect from all others in a survey area and
each map unit has a symbol that uniquely identifies the map unit
on a soil map. Each individual area, point, or line so identified
on the map is a delineation.
Soil Scientists identify small areas of soils or miscellaneous areas
that have properties and behavior significantly different than the
named soils in the surrounding map unit. These minor components
may be indicated as special features. If they have a minimal effect
on use and management, or could not be precisely located, they may
not be indicated on the map.
A map unit has specified kinds of soils or miscellaneous areas
(map unit components), each with a designated range in
proportionate extent. Map units include one or more kinds of soil
or miscellaneous area. Miscellaneous areas are areas that have little
or no recognizable soil.
Specific National Cooperative Soil Survey standards and procedures
were used in the classification of soils, design and name of map
units, and location of special soil features. These standards are
outlined in Agricultural Handbook 18, Soil Survey Manual, 1993,
USDA, NRCS; Agricultural Handbook 436, Soil Taxonomy, 1995,
USDA, NRCS; and all Amendments; Keys to Soil Taxonomy,
(current issue) USDA, NRCS; National Soil Survey
Handbook, title 430-VI,(current issue) USDA, NRCS.
The actual composition and interpretive purity of the map unit
delineations were based on data collected by scientists during
the course of preparing the soil maps. Adherence to National
Cooperative Soil Survey standards and procedures is based on
peer review, quality control, and quality assurance. Quality
control is outlined in the memorandum of understanding for the
soil survey area and in documents that reside with the Natural
Resources Conservation Service state soil scientist. Four kinds
of map units are used in soil surveys: consociations, complexes,
associations, and undifferentiated groups.
Consociations - Consociations are named for the dominant soil.
In a consociation, delineated areas use a single name from the
dominant component in the map unit. Dissimilar components are
minor in extent. The soil component in a consociation may be
identified at any taxonomic level. Soil series is the lowest
taxonomic level. A consociation that is named as a miscellaneous
area is dominantly that kind of area and minor components do not
significantly affect the use of the map unit. The total amount of
dissimilar inclusions of other components in a map unit generally
does not exceed about 15 percent if limiting and 25 percent if
nonlimiting. A single component of a dissimilar limiting inclusion
generally does not exceed 10 percent if very contrasting.
Complexes and associations - Complexes and associations consist
of two or more dissimilar components that occur in a regularly
repeating pattern. The total amount of other dissimilar components
is minor extent. The following arbitrary rule determines whether
complex or association is used in the name. The major components
of an association can be separated at the scale of mapping. In
either case, because the major components are sufficiently different
in morphology or behavior, the map unit cannot be called a
consociation. In each delineation of a complex or an association,
each major component is normally present though their proportions
may vary appreciably from one delineation to another. The total
amount of inclusions in a map unit that are dissimilar to any of
the major components does not exceed 15 percent if limiting and
25 percent if nonlimiting. A single kind of dissimilar limiting
inclusion usually does not exceed 10 percent.
Undifferentiated groups - Undifferentiated groups consist of two
or more components that are not consistently associated
geographically and, therefore, do not always occur together in
the same map delineation. These components are included in the
same named map unit because their use and management are the same
or very similar for common uses. Generally they are grouped together
because some common feature, such as steepness, stoniness, or
flooding, determines their use and management. If two or more
additional map units would serve no useful purpose, they may be
included in the same unit. Each delineation has at least one of the
major components, and some may have all of them. The same principles
regarding the proportion of minor components that apply to
consociations also apply to undifferentiated groups. The same
principles regarding proportion of inclusion apply to
undifferentiated groups as to consociations.
Minimum documentation consists of three complete soil profile
descriptions that are collected for each soil added to the legend,
one additional per 3,000 acres mapped; three 10 observation
transects for each map unit, one additional 10 point transect per
3,000 acres.
A defined standard or level of confidence in the interpretive
purity of the map unit delineations is attained by adjusting the
kind and intensity of field investigations. Field investigations
and data collection are carried out in sufficient detail to name
map units and to identify accurately and consistently areas of
about 4 acres.
Certain node/geometry and topology GT- polygon/chain relationships are collected or generated to satisfy topological requirements (the GT-polygon corresponds to the soil delineation). Some of these requirements include: chains must begin and end at nodes, chains must connect to each other at nodes, chains do not extend through nodes, left and right GT-polygons are defined for each chain element and are consistent throughout, and the chains representing the limits of the file are free of gaps. The tests of logical consistency are performed using vendor software. All internal polygons are tested for closure with vendor software and are checked on hard copy plots. All data are checked for common soil lines (i.e., adjacent polygons with the same label). Edge locations generally do not deviate from centerline to centerline by more than 0.01 inch. The survey of Teton Area, Idaho-Wyoming is joined to the surveys of Fremont County, Idaho, Western Part, and Madison County Area, Idaho.
Are there legal restrictions on access or use of the data?
- Access_Constraints: None
- Use_Constraints:
- The U.S. Department of Agriculture, Natural Resources Conservation Service, should be acknowledged as the data source in products derived from these data.
This data set is not designed for use as a primary regulatory tool in permitting or citing decisions, but may be used as a reference source. This is public information and may be interpreted by organizations, agencies, units of government, or others based on needs; however, they are responsible for the appropriate application. Federal, State, or local regulatory bodies are not to reassign to the Natural Resources Conservation Service any authority for the decisions that they make. The Natural Resources Conservation Service will not perform any evaluations of these maps for purposes related solely to State or local regulatory programs.
Photographic or digital enlargement of these maps to scales greater than at which they were originally mapped can cause misinterpretation of the data. If enlarged, maps do not show the small areas of contrasting soils that could have been shown at a larger scale. The depicted soil boundaries, interpretations, and analysis derived from them do not eliminate the need for onsite sampling, testing, and detailed study of specific sites for intensive uses. Thus, these data and their interpretations are intended for planning purposes only. Digital data files are periodically updated. Files are dated, and users are responsible for obtaining the latest version of the data.
800 672 5559 (voice)
817 509 3469 (FAX)
Teton Area, Idaho-Wyoming SSURGO
Although these data have been processed successfully on a computer system at the U.S. Department of Agriculture, no warranty expressed or implied is made by the Agency regarding the utility of the data on any other system, nor shall the act of distribution constitute any such warranty. The U.S. Department of Agriculture will warrant the delivery of this product in computer readable format, and will offer appropriate adjustment of credit when the product is determined unreadable by correctly adjusted computer input peripherals, or when the physical medium is delivered in damaged condition. Request for adjustment of credit must be made within 90 days from the date of this shipment from the ordering site.
The U.S. Department of Agriculture, nor any of its agencies are liable for misuse of the data, for damage, for transmission of viruses, or for computer contamination through the distribution of these data sets. The U.S. Department of Agriculture (USDA) prohibits discrimination in all its programs and activities on the basis of race, color, national origin, sex, religion, age, disability, political beliefs, sexual orientation, or marital or family status. (Not all prohibited bases apply to all programs.)
Data format: | spatial in format ArcView shapefile Size: 5.3 |
---|---|
Network links: |
URL:<http://SoilDataMart.nrcs.usda.gov/> |
Data format: | spatial in format ARC/INFO coverage Size: 5.3 |
---|---|
Network links: |
URL:<http://SoilDataMart.nrcs.usda.gov/> |
Data format: | spatial in format ARC/INFO interchange file Size: 5.3 |
---|---|
Network links: |
URL:<http://SoilDataMart.nrcs.usda.gov/> |
Data format: | keys and attributes in format ASCII Size: 26.5 |
---|---|
Network links: |
URL:<http://SoilDataMart.nrcs.usda.gov/> |
There is currently no direct charge for requesting data or for retrieval via FTP.
Visit the above mentioned Internet Web Site, select state or territory, then select individual soil survey area of interest. Spatial line data and locations of special feature symbols are in ESRI ArcGIS (ArcView,ArcInfo) shapefile, coverage and interchange (i.e., export) formats. The National Soil Information System attribute soil data are available in variable length, pipe delimited, ASCII file format.
Typically within four hours
208-378-5728 (voice)
hal.swenson@id.usda.gov